|
Create instant wireless citywide networks
- click here for the
multi-radio outdoor version
- click here for the
standard outdoor version -
Built for citywide
deployments, the Xnet Viper multi-radio indoor node offers several
unique features that make it the best choice for large-scale mesh
network solutions. The Xnet Viper node has been designed to be a
modular mesh router. This means that it can handle 4 radios’
in a balanced mix of 2.4-2.6GHz, 3.4-3.6GHz, 4.9GHz, 5GHz and 900MHz
bands. The modular design of the Xnet Viper node,
which allows for a throughput of 20-40Mb/s depending on the distance, will be used to
blend Wireless mesh and Mobile WiMAX technology’s into the seamless
working Hopling Metro Topology solution.
Xnet Viper-IV
multi-radio indoor mesh
node including four (4) radio cards, PoE
and indoor antennas
Xnet
Viper multi-radio mesh nodes explained
Hopling Technologies' HopWARE Mesh
Architecture
(HMA)
is a “full mesh network”
solution as
opposed to the tree structure topology as found in other vendor’s
products. The full mesh topology means every node has connection to
every other node in the network and is capable of sending traffic to
that node. This full mesh topology also spans the multiple radio
solution, therefore the most flexible solution on the market today.
Apart from the enhanced software mesh router capabilities, each
indoor Xnet Viper node also contains:
-
Configurable Layer 3
Customer Gateway, customers traffic can be controlled on a per
session basis, with full control over up/down stream data rates
and QoS parameters.
-
Call Home
functionality, nodes can be deployed anywhere in the world and
as long as they have a route to the Internet can be
automatically configured from a central back-office.
-
Configurable Layer 2
firewall, preventing peer-to-peer traffic across the mesh
network and spanning across multiple radios.
-
Multiple Gateway
functionality, meaning the network space can be divided/shared
between different network operators whereby every operator can
have its own SSIDs, VLANs, Gateways, public and private IP
addresses and back-office.
-
Automatic mesh
configuration based on patented Hopling Discovery Protocol (HDP).
One network operator can operate 65536 independent mesh networks
in the same space.
-
HDP Visual
(demo), on-board
network monitoring tools that enables the network operator to
get a visual view of its wireless network, HDP Visual also
interfaces with a centralized back-office.
-
Remotely software
upgradeable, taking over existing network operator’s settings
after a software upgrade.
-
Remotely configurable
through secure protocols.
Power-over-Ethernet (PoE)
inserter
The Xnet Viper multi-radio indoor mesh nodes are
powered using a single standard Cat 5 Ethernet
cable for both power and data. Read more about the
Power-over-Ethernet IEEE 802.3af capabilities of Hopling
Technologies products
here...
HopWARE Power Interface
An option to customers is the HopWARE Power Interface, a device
suitable for Xnet Viper indoor mesh nodes using PoE switches.
Please check your local sales representative for more
details.
Ordering information Xnet
Viper multi-radio mesh nodes:
HV.10.XXXX
-
whereas the X
stands for a certain type of radio card.
Ordering information examples:
HV.10.1100 - Indoor node 2x
2.4/5GHz (a/b/g) - Xnet Viper-II
HV.10.2290 - Indoor FCC node 2x 2.4GHz
(b/g) and 1x 900MHz - Xnet Viper-III
HV.10.2255 - Indoor FCC node 2x 2.4GHz
(b/g), 1x 3.5GHz, 1x 4.9GHz and 1x 5GHz (a) - Xnet Viper-IV
Please check your local sales representative for more
details about packages and a la carte configurations.
Multi-radio
indoor node for the 2.4-2.6GHz, 3.4-3.6GHz, 4.9GHz, 5GHz,
900MHz bands.
General enquiry via email
info@hopling.com
or contact the Hopling Technologies organization by telephone
+31 36 548 6868.
|
