|
Create instant wireless citywide networks
- click here for the indoor version
-
Built for citywide
deployments, the Xnet Viper multi-radio outdoor mesh node offers several
unique features that make it the best choice for large-scale mesh
network solutions. The Xnet Viper node has been designed to be a
modular mesh router. This means that it can handle 4 radios’
in a balanced mix of 2.4-2.6GHz, 3.4-3.6GHz, 4.9GHz, 5GHz and 900MHz
bands. The modular design of the Xnet Viper node,
which allows for a throughput of 20-40Mb/s depending on the distance, will be used to
blend Wireless mesh and Mobile WiMAX technology’s into the seamless
working Hopling Metro Topology solution.
Section of a wireless city switch based on Xnet Viper-II
multi-radio mesh nodes
Xnet
Viper multi-radio mesh nodes explained
Hopling Technologies' HopWARE Mesh Architecture (HMA) is a “full mesh network”
solution as
opposed to the tree structure topology as found in other vendor’s
products. The full mesh topology means every node has connection to
every other node in the network and is capable of sending traffic to
that node. This full mesh topology also spans the multiple radio
solution, therefore the most flexible solution on the market today.
Apart from the enhanced software mesh router capabilities, each
outdoor Xnet Viper mesh node also contains:
-
Configurable Layer 3
customer gateway, customers traffic can be controlled on a per
session basis, with full control over up/down stream data rates
and QoS parameters.
-
Call Home
functionality, nodes can be deployed anywhere in the world and
as long as they have a route to the Internet can be
automatically configured from a central back-office.
-
Configurable Layer 2
firewall, preventing peer-to-peer traffic across the mesh
network and spanning across multiple radios.
-
Multiple Gateway
functionality, meaning the network space can be divided/shared
between different network operators whereby every operator can
have its own SSIDs, VLANs, Gateways, public and private IP
addresses and back-office.
-
Automatic mesh
configuration based on patented Hopling Discovery Protocol (HDP).
One network operator can operate 65536 independent mesh networks
in the same space.
-
HDP Visual
(demo), on-board
network monitoring tools that enables the network operator to
get a visual view of its wireless network, HDP Visual also
interfaces with a centralized back-office.
-
Remotely software
upgradeable, taking over existing network operator’s settings
after a software upgrade.
-
Remotely configurable
through secure protocols.
-
Can be powered by all
Power-over-Ethernet switches and power supplies, including
legacy Cisco. No need to run 110V/220VAC to the roof.
Power-over-Ethernet (PoE)
inserter
The Xnet Viper multi-radio outdoor mesh nodes are equipped with an
enhanced power supply interoperable
with the de-facto PoE standard and IEEE 802.3af
industry-standard PoE devices. The Xnet Viper
nodes are powered using a
single standard Cat 5 Ethernet cable for both power and data. Read more about the Power-over-Ethernet IEEE 802.3af capabilities of Hopling
Technologies products
here...
HopWARE
Console Interface
Also available as an option to customers is the HopWARE Console
Interface, an ingenious device which allows for a direct connection
between an Xnet Viper node and a laptop enabling full diagnostics.
It makes on-site problem solving a lot easier. Simply tapping into
the node will solve a problem without removing and de-installing the
nodes.
Please check your local sales
representative for more details.
Ordering information Xnet
Viper multi-radio mesh nodes:
HV.11.XXXX whereas the X stands for a certain type of radio card.
Ordering information examples:
HV.11.1100 - Outdoor node 2x
2.4/5GHz (a/b/g) - Xnet Viper-II
HV.11.2290 - Outdoor FCC node 2x 2.4GHz
(b/g) and 1x 900MHz - Xnet Viper-III
HV.11.2345 - Outdoor FCC node 1x 2.4GHz
(b/g), 1x 3.5GHz, 1x 4.9GHz and 1x 5GHz (a) - Xnet Viper-IV
HV.11.2222 - Outdoor FCC node 4x 2.4/5GHz
(a/b/g) - Xnet Viper-IV
Please check your local sales representative for more
details about packages and a la carte configurations.
Multi-radio outdoor node for the 2.4-2.6GHz,
3.4-3.6GHz, 4.9GHz, 5GHz,
900MHz bands.
Available
with a variety of outdoor
directional and/or sector antennas (contact sales).
General enquiry via email
info@hopling.com
or contact the Hopling Technologies organization by telephone
+31 36 548 6868.
|
